Table of Contents
Advertisement
3.1. Hardware Specifications
EAN
Dimensions
Weight
Package
Conformity
Power supplies
Power consumption
3.2. Package Contents
The package of the M-32 DA Pro contains the following items:
• M-32 DA Pro
• two rack mount brackets
• four screws for rack mount brackets
• two power cords
• MIDI breakout cable
• 5 customizable channel labels
• printed manual
If any item is missing from a factory-sealed package, please contact your support
immediately.
3.3. Power On
The M-32 DA Pro has a power off switch at the rear and a standby switch at the front.
Perform the following steps to power on the M-32 DA Pro:
1. Ensure either or both power inlets are properly connected to a power source.
2. Toggle the mains switch at the back of the device to position I (down) The power indicator will light
up in red (Standby) or white (On). This depends on the state of the device before the rear switch was
toggled or the power cord removed.
3. If the device is in standby mode, push the standby switch to boot the device.
The M-32 DA Pro features a dark mode which deactivates some or all lights of the front
panel. This can be used to let the device appear powered off when it is in fact powered on.
A short push on the standby switch or the the encoder deactivates this mode temporarily.
RME M-32 DA Pro User's Guide
RME M-32 DA Pro
42 6012336 322 2
440 x 44 x 243 mm (17.3 x 1.7 x 9.6 inches)
2.8 kg (6.2 lbs)
560 x 315 x 115 mm (22.1 x 12.4 x 4.5 inches)
CE, FCC, WEEE, RoHS
Dual 60W 90-264V AC
typ. 30W, standby 0.5W
3.1. Hardware Specifications | 6
Advertisement
Table of Contents
