Advertisement
Quick Links
HiTemp140-M12
High Temperature Data Logger
with an M12 Probe Connector
PRODUCT
USER GUIDE
To view the full MadgeTech product line, visit
our website at madgetech.com.
TABLE OF CONTENTS
2 Product Overview
2 Installation Guide
2 Device Operation
3 Wiring the Data Logger
3 Probe Connection
3 Device Maintenance
4 Need Help?
Advertisement
Related Manuals for MadgeTech HiTemp140-M12
Summary of Contents for MadgeTech HiTemp140-M12
- Page 1 M12 Probe Connector PRODUCT TABLE OF CONTENTS USER GUIDE 2 Product Overview 2 Installation Guide To view the full MadgeTech product line, visit our website at madgetech.com. 2 Device Operation 3 Wiring the Data Logger 3 Probe Connection 3 Device Maintenance...
- Page 2 Note: The device will stop recording data when the end of memory The HiTemp140-M12 logger itself is rated IP40 and not is reached or the device is stopped. At this point the device cannot be submersible.
- Page 3 O-ring maintenance is a key factor when properly caring for the HiTemp140-M12. The O-rings ensure a tight Refer to the Trigger Settings - MadgeTech 4 Data Logger seal and prevent liquid from entering the inside of the Software video on madgetech.com...
- Page 4 Product Support & Troubleshooting • Visit our Resource Library online at madgetech.com/resources. • Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com. MadgeTech 4 Software Support • Refer to the built-in help section of the MadgeTech 4 Software.