Download
Share
Print this page
MadgeTech SHOCK300 Product User Manual
  1. Manuals
  2. Brands
  3. MadgeTech Manuals
  4. Data Loggers
  5. SHOCK300
  6. Product user manual

MadgeTech SHOCK300 Product User Manual

Tri-axial shock data logger
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
SHOCK300
Tri-Axial Shock Data Logger
PRODUCT
USER GUIDE
To view the full MadgeTech product line, visit our
website at madgetech.com.

TABLE OF CONTENTS

Advertisement

loading

Related Manuals for MadgeTech SHOCK300

Summary of Contents for MadgeTech SHOCK300

  • Page 1: Table Of Contents

    Tri-Axial Shock Data Logger PRODUCT TABLE OF CONTENTS USER GUIDE 2 Product Overview 3 Software Installation Guide To view the full MadgeTech product line, visit our website at madgetech.com. 4 Device Operation 7 Product Maintenance 8 Specifications 9 Dimensional Drawings...

  • Page 2: Product Overview

    Shock300 PRODUCT OVERVIEW The MadgeTech Shock300 is a 3-axis shock / acceleration data logger. Each of the three channels may be made active or inactive as needed. Disabling channels will provide additional storage to the enabled channels. The Shock300 is specifically designed for documenting dynamic environments such as moving vehicles, trucks, containers, ships, etc.

  • Page 3: Software Installation Guide

    2. Locate and unzip the downloaded file (typically you can do this by right clicking on the file and selecting Extract). 3. Open the MTInstaller.exe file. 4. You will be prompted to select a language, then follow the instructions provided in the MadgeTech 4 Setup Wizard to finish the MadgeTech 4 Software installation.

  • Page 4: Device Operation

    Shock300 DEVICE OPERATION Connecting and Starting the Data Logger Enabling and Disabling of Channels 1. Once the software is installed and running, plug the 1. Connect the logger to the interface cable. interface cable into the data logger. 2. Highlight the data logger in the Connected Devices list.
  • Page 5 Logging Mode - Peak vs. Instantaneous When Custom Start is selected in the MadgeTech 4 Software, the user is presented with a range of logging time intervals or actual recording rates (sampling rates). For all but the two highest recording rates, the user will also have a choice of Peak vs.
  • Page 6 The trigger sample count should be chosen carefully because it may gather data points for which we have no The Shock300 allows the user to enter a shock value which interest. For instance, if 100 were entered and the logging will trigger the storage of data.

  • Page 7: Product Maintenance

    Inspection The Shock300 battery does not require any periodic The Shock300 may be inspected visually for any signs of maintenance. It should be charged as needed. If the damage, especially to the gray gasket or to the USB jack. If madgetech.com...

  • Page 8: Specifications

    TEMPERATURES ABOVE THE MAXIMUM OPERATING TEMPERATURE OF THE PRODUCT. DISPOSE OF PROPERLY. CHARGE ONLY WITH THE PROVIDED MADGETECH CHARGER, OR FROM OTHER USB POWER SOURCE VIA THE MADGETECH PROVIDED CABLE. Specifications subject to change. See MadgeTech’s terms and conditions at madgetech.com.

  • Page 9: Dimensional Drawings

    TYPE C GASKET USB CONNECTOR 1.34 [34.0 mm] 1.055 [26.8 mm] 1.179 [29.9 mm] 0.885 [22.5 mm] BATTERY PACK FRONT VIEW BACK VIEW (BOTTOM) 6 Warner Road, Warner, NH 03278 (603) 456-2011 • info@madgetech.com • madgetech.com DOC-1369036-00 REV 32 2020.03.19...