Advertisement
Quick Links
HITEMP140-M12
High Temperature Data Logger
with an M12 Probe Connector
PRODUCT
USER GUIDE
To view the full MadgeTech product line, visit
our website at madgetech.com.
TABLE OF CONTENTS
2 Product Overview
2 Installation Guide
2 Device Operation
3 Wiring the Data Logger
3 Probe Connection
3 Device Maintenance
4 Need Help?
Advertisement
Related Manuals for MadgeTech HITEMP140-M12
Summary of Contents for MadgeTech HITEMP140-M12
- Page 1 M12 Probe Connector PRODUCT TABLE OF CONTENTS USER GUIDE 2 Product Overview 2 Installation Guide To view the full MadgeTech product line, visit our website at madgetech.com. 2 Device Operation 3 Wiring the Data Logger 3 Probe Connection 3 Device Maintenance...
- Page 2 7. Disconnect the data logger from the interface cable and place it in the environment to measure. The HiTemp140-M12 logger itself is rated IP40 and not submersible. It will inherit the IP rating of the probe it Note: The device will stop recording data when the end of memory is reached or the device is stopped.
- Page 3 O-Rings Set Password O-ring maintenance is a key factor when properly caring for the HiTemp140-M12. The O-rings ensure a tight To password protect the device so that others cannot seal and prevent liquid from entering the inside of the start, stop or reset the device: device.
- Page 4 Product Support & Troubleshooting • Visit our Resource Library online at madgetech.com/resources. • Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com. MadgeTech 4 Software Support • Refer to the built-in help section of the MadgeTech 4 Software.