Explanation Of Functions - Becker CentronicPLUS SWC541 PLUS Assembly And Operating Instructions Manual

Explanation of functions

LED ring
Display of:
• Confirmations from receiver
• Manual / automatic
• Threshold / dimming values
• Battery status
• Visual support during commissioning
Keypad , ,
• Drive commands
• Manual/automatic mode switching
• Intermediate position I + II
Function button
• Identification of the transmitter
• Retrieval/setting of thresholds
• Retrieval/setting of rain reaction
Programming button
• Environment scan, as well as selection and programming of receivers
• Add and remove receivers to/from the installation
• Restore factory settings
• Add additional transmitters to the installation
manual / automatic
You can display and select the "Manual" or "Automatic" setting by pressing the
STOP button. Only manual drive commands and emergency signals can be
performed with the "Manual" setting. In addition, automatic drive commands
are also performed in the "Automatic" setting. The automatic functions are not
interrupted if a manual drive command is carried out when in automatic mode.
25 - en