What To Do If - Becker CentronicPLUS SWC541 PLUS Assembly And Operating Instructions Manual

Problem
Tubular drive/receiver is not re-
sponding.
LED ring flashes yellow or red 4
times.
The LED ring lights up red when the
receiver for the setting mode is se-
lected.
Automatic drive commands are not
executed.
System does not extend in automatic
mode.
System does not extend in automatic
or manual mode.

What to do if...?

Insert new batteries into the hand-
held transmitter.
Insert batteries into the hand-held
transmitter correctly.
Reduce distance from receiver.
Program transmitter.
Check the receiver.
Insert new batteries into the trans-
mitter.
Reduce distance from receiver.
Check electr. connection of the re-
ceiver.
Put the receiver into programming
mode.
Add the transmitter to the installa-
tion.
Check whether automatic mode is
active.
Adjust sun threshold value.
Wait for the wind to die down.
Wind threshold value exceeded. Wait
for the wind to die down.
Remedy
35 - en