Quick Setting Toolbar In Live View Mode - HIKVISION HWD-7100MH Series User Manual

Step 2 Use the mouse wheel to double-click on the screen again to switch to the aux output, or click
Cancel to cancel the operation.
Step 3 Select the Menu Output Mode to others from the right-click menu on the monitor.
Step 4 On the pop-up message box, click Yes to reboot the device to enable the selected menu
output as the main output.
You can select the Menu Output Mode under Menu > Configuration > General > More Settings
to Auto and HDMI/VGA and then reboot the device to switch the main output.

3.2.3 Quick Setting Toolbar in Live View Mode

On the screen of each channel, there is a quick setting toolbar which shows when you click the
screen.
You can refer to Table 3-5 for the description of Quick Setting Toolbar icons.
Icons Description
Enable/Disable
/
Manual Record
PTZ Control
Close Live View
Show/Hide VCA
/
Information
Showing/Hiding VCA information is only applicable to HWD-7100MH and HWD-7200MH
series DVR.
Digital Video Recorder User Manual
Figure 3-2 Switch Main and Aux Output
Figure 3-3 Quick Setting Toolbar
Table 3-4 Description of Quick Setting Toolbar Icons
Icons Description
Instant Playback
Digital Zoom
Face Detection
49
Icons Description
Mute/Audio on
/
Image Settings
Information