HIKVISION HWD-7100MH Series User Manual page 199

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password
of your own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase
the security of your product. And we recommend you reset your password regularly, especially in the
high security system, resetting the password monthly or weekly can better protect your product.
Level: Set the user level to Operator or Guest. Different user levels have different operating
permission.
Operator: The Operator user level has permission of Two-way Audio in Remote
Configuration and all operating permission in Camera Configuration by default.
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and
only has the local/remote playback in the Camera Configuration by default.
User's MAC Address: The MAC address of the remote PC which logs onto the DVR. If it
is configured and enabled, it only allows the remote user with this MAC address to access
the DVR.
Step 4 Click the OK button to save the settings and go back to the User Management interface.
The added new user will be displayed on the list, as shown below.
Step 5 You can assign permissions for the added user.
1) Select the user from the list and then click
as shown below.
Digital Video Recorder User Manual
Figure 15-8 Added User Listed in User Management Interface
to enter the Permission Settings interface,
198