HIKVISION HWD-7100MH Series User Manual page 202

For the added user accounts, you can edit the parameters.
Step 1 Go to Menu > Configuration > User.
Step 2 Select the user to be edited from the list.
Step 3 Click the
Step 4 Edit the corresponding parameters.
Operator and Guest
You can edit the user information, including user name, password, permission level and
MAC address. Check the checkbox of Change Password if you want to change the
password, and input the new password in the text field of Password and Confirm. A strong
password is recommended.
Admin
You are only allowed to edit the password and MAC address. Check the checkbox of
Change Password if you want to change the password, and input the correct old password,
and the new password in the text field of Password and Confirm.
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password
of your own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase
the security of your product. And we recommend you reset your password regularly, especially in the
high security system, resetting the password monthly or weekly can better protect your product.
Hold the icon and you can see the clear text of the password. Release the mouse and the content of
the password restores invisible.
Step 5 Edit the unlock pattern for the admin user account.
Digital Video Recorder User Manual
icon to enter the Edit User interface, as shown below.
Figure 15-11 Edit User Interface
201