HIKVISION HWD-7100MH Series User Manual page 34

Step 3 Click Next button after configuring the advanced network parameters, which will take you
to the HDD Management interface as shown below.
Step 4 To initialize the HDD, click the Init button. Initialization will remove all the data saved in
the HDD.
Step 5 Click Next button to enter the IP Camera Management interface.
Step 6 Add the IP camera.
1) Click Search to search the online IP Camera. The Security status shows whether it is active
or inactive. Before adding the camera, make sure the IP camera to be added is in active
Digital Video Recorder User Manual
Figure 2-21 Set Advanced Network Parameters
Figure 2-22 HDD Management
33