Adding And Connecting The Ip Cameras; Activating The Ip Camera - HIKVISION HWD-7100MH Series User Manual

Step 3 Input the new password and confirm the password.
Step 4 Click OK to save the new password. Then the Attention box pops up as shown below.
Step 5 Click OK and the Attention box as below pops up to remind you to duplicate the password of
the device to IP cameras that are connected with default protocol. Click Yes to duplicate the
password or No to cancel it.
If you want to retrieve the password when you forget it, you must export the GUID file first.
Once the password is reset, the GUID file will be invalid. You can export a new GUID file.
Refer to Chapter 17.5.3 Editing a User for reference.

2.7 Adding and Connecting the IP Cameras

2.7.1 Activating the IP Camera

Purpose
Before adding the camera, make sure the IP camera to be added is in active status.
Digital Video Recorder User Manual
Figure 2-30 Reset Password
Figure 2-31 GUID File Imported
Figure 2-32 Duplicate the Password
37