HIKVISION HWD-7100MH Series User Manual page 124

Step 2 Select a Camera you want to detect video tampering.
Step 3 Check the checkbox of Enable Video Tampering Detection.
Step 4 Drag the sensitivity bar and choose a proper sensitivity level.
Step 5 Click to set handling method of video tampering. Set arming schedule and alarm
response actions of the channel.
1) Click Arming Schedule tab to set the arming schedule of response action.
2) Select one day of a week and up to eight time periods can be set within each day.
Time periods shall not be repeated or overlapped.
3) Select Linkage Action tab to set alarm response actions of video tampering alarm (please
refer to Chapter 8.8 Setting Alarm Response Actions).
Repeat the above steps to set arming schedule of other days of a week. You can also use
Copy button to copy an arming schedule to other days.
Digital Video Recorder User Manual
Figure 8-14 Video Tampering Interface
Figure 8-15 Set Arming Schedule of Video Tampering
123