Quick Setting Toolbar In Live View Mode - HIKVISION DS-7100HWI-SL Series User Manual

User Manual of DS-7100HWI/HVI-SL/SH and DS-7200HI-SL Series DVR
cancel the operation.
3. Select the Menu Output Mode to Main CVBS from the right-click menu on the CVBS output monitor.
Figure 3.3 Right-click Menu on CVBS Output Monitor
4. On the pop-up message box, click Yes to restart the device to enable the CVBS output as the main output.
You can select the Menu Output Mode under Menu > Configuration > General > More Settings to Auto
or HDMI/VGA and then restart the device to switch the main output back to VGA output.

3.2.4 Quick Setting Toolbar in Live View Mode

On the screen of each channel, there is a quick setting toolbar which shows when you right-click mouse on the
camera.
Table 3.3 Description of Quick Setting Toolbar Icons
Icons Description
Enable Manual
Record
Digital Zoom
Instant Playback
Instant Playback only shows the record in last five minutes. If no record is found, it means there is no
record during the last five minutes.
Digital Zoom
Digital Zoom can zoom in the selected area to the full screen. You can left-click and draw to select the
Figure 3.4 Quick Settings Toolbar
Icons Description
Instant Playback
Image Settings
28
Icons Description
Mute/Audio on
/
Close