Table of Contents
Advertisement
AXIS M4308-PLE Panoramic Camera
Specifications
For SD card recommendations, see axis.com.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
The control button is used for:
•
Resetting the product to factory default settings. See Reset to factory default settings on page 54.
Intrusion alarm switch
Use the intrusion alarm switch to get a notification when someone opens the device's housing. Set up an action rule, for example
recording or notification, to perform an action when the switch is activated. See .
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
I/O connector
Use the I/O connector with external devices in combination with, for example, motion detection, event triggering, and alarm
notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:
Digital input - For connecting devices that can toggle between an open and closed circuit, for example PIR sensors, door/window
contacts, and glass break detectors.
Supervised input - Enables possibility to detect tampering on a digital input.
Digital output - For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX®
Application Programming Interface, trough an event or from the product's webpage.
4-pin terminal block
Function
DC ground
DC output
Pin
Notes
1
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
59
Specifications
0 V DC
12 V DC
Max load = 25 mA
Advertisement
Table of Contents
