Table of Contents
Advertisement
AXIS M4308-PLE Panoramic Camera
Configure your device
Quad View
View Areas 1-4
Corner Left/Right
Double Corner
Corridor
Select capture mode
Which capture mode to choose depends on the requirements of frame rate and resolution for the specific surveillance setup. For
specifications about available capture modes, see the product's datasheet. To find the latest version of the datasheet, go to axis.com.
Level the camera
To adjust the view in relation to a reference area or object, use the leveling guide in combination with the digital roll slider in the
camera.
1. Go to Settings > System > Orientation and click
2. Adjust the camera by using Digital roll until the position of the reference area or object, is aligned with the leveling guide.
Select exposure mode
To improve image quality for specific surveillance scenes, use exposure modes. Exposure modes lets you control aperture, shutter
speed, and gain. Go to Video > Image > Exposure and select between the following exposure modes:
•
For most use cases, select Automatic exposure.
•
For environments with certain artificial lighting, for example fluorescent lighting, select Flicker-free.
Select the same frequency as the power line frequency.
•
For environments with certain artificial light and bright light, for example outdoors with fluorescent lighting at night and
sun during daytime, select Flicker-reduced.
Select the same frequency as the power line frequency.
•
To lock the current exposure settings, select Hold current.
Optimize IR illumination
Depending on the installation environment and the conditions around the camera, for example external light sources in the scene,
you can sometimes improve the IR illumination if you manually adjust the intensity of the LEDs.
1. Go to Video > Image > Day-night mode.
2. Turn on Allow illumination.
.
7
Advertisement
Table of Contents
