Table of Contents
Advertisement
AXIS M4308-PLE Panoramic Camera
Configure your device
8. Click Save.
9. Create another rule with the name "Direct the camera to the gate".
10. Select the same input signal as before, but as action select the previously created "Gate entrance" preset position.
11. Click Save.
Set up the intrusion alarm
Use the intrusion alarm switch to, for example, send a notification if someone opens the camera housing.
Before you start
•
Connect the intrusion alarm switch to pin 1 (ground) and pin 3 (digital input) of the camera's I/O connector.
Configure the input port
1. Go to System > Accessories > I/O ports.
2. For Port 1:
2.1 Select Circuit closed.
Add a recipient:
3. Go to System > Events > Recipients and click Add recipient.
4. Type a name for the recipient.
5. Select Email.
6. Type an email address to send the email to.
7. The camera doesn't have it's own email server, so it will need to log into another email server to be able to send mails. Fill
in the rest of the information according to your email provider.
8. To send a test email, click Test.
9. Click Save.
Create a rule
10. Go to System > Events > Rules and add a rule.
11. Type a name for the rule.
12. In the list of conditions, under I/O, select Digital input.
13. In the list of ports, select Port 1.
14. In the list of actions, under Notifications, select Send notification to email.
15. Select a recipient from the list or go to Recipients to create a new recipient.
To create a new recipient, click
16. Type a subject and a message for the email.
17. Click Save.
. To copy an existing recipient, click
15
.
Advertisement
Table of Contents
