Configure Your Device; Adjust The Image - Axis M4308-PLE User Manual

Panoramic camera

Table of Contents

AXIS M4308-PLE Panoramic Camera

Configure your device

This section includes instructions about configuring your device. If you want to learn more about how certain features work, go

to Learn more on page 48.

Rotate the image with digital roll

Note

If you rotate the image, all views are affected.

To rotate the 360° view, go to Video > Image > Orientation and use the Roll slider.

You can also enter a value for the roll angle in the text field.

Note

If digital roll is less than -90°, or more than +90°, then the left and the right audio channels switch place automatically. This

means that when the image is rotated, so is the audio.

Configure the quad view

Note

Quad view is available in these mounting positions:

• Desk

• Ceiling

1. Click

2. Select Quad view among the live feed sources.

3. Go to Settings > System > Orientation and click

4. To change the view order, drag and drop the yellow boxes.

About capture modes

Capture mode sets the boundaries of the video image, affecting how the image is captured and processed. Beyond aspect ratio and

resolution, it affects many other settings as well, such as, exposure zones, guard tours, image overlays, motion detection (include

areas and exclude areas), preset positions, privacy masks, and view areas. The following capture modes are available:

View

Overview

Panorama

Double Panorama

and select Legacy device interface.

Video image boundaries

Table of Contents