Flow; High Pk; Clr Flow; Settings - Weathermatic ProLine 800 Series Owner's Manual

5.21

FLOW

NOTE: Flow menus require the addition of a SmartLink
AirCard with FLOW capabilities.

5.21.1 HIGH PK

Shows the highest flow value for each individual zone, can scroll
through each zone for a 7-day history.

5.21.2 CLR FLOW

Clears All flow data from the controller.

5.21.3 SETTINGS

Allows the user to set Flow parameters.
5.21.3.1 FLOW PPG
A settable value that lets the controller know how many . .
pulses to expect per gallon.
5.21.3.2 SENSOR
Lets the user select a custom sensor or one of our preset
flow sensor types.
5.21.3.3 SHUTDOWN
Allows the user to select if the controller should shut down
operation per zone or by system.
5.21.3.4 LINEFILL
The time it takes for the system to purge air and completely
fill the piping with water.
5.21.3.5 SAMPLE T
How often the controller reads flow pulses from the Aircard.
5.21.3.6 LEAK DET
A settable value that determines when the controller will
produce a Leak Detect fault.
5.21.3.7 LOW LMT
The lowest flow value the controller can sense without
producing a fault.
5.21.3.8 HIGH LMT
The highest flow value the controller can sense without
producing a fault.

5.21.4 TOT FLOW

Shows the daily total flow for each zone. Can scroll through each
zone for a 7-day history.

5.21.5 LOW PK

Shows the lowest flow value for each individual zone, can scroll
through each zone for a 7-day history.
5.22 SLW
5.22.1 RAIN
The rain selection is on/off toggle to override the SLW sensor
feature for selected zones. Factory default is ON for all zones.

5.22.2 FREEZE

The freeze selection is on/off toggle to override the SLW freeze
sensor feature for selected zones. Factory default is ON for all
zones.

5.22.3 DELAY

This feature allows the user to adjust the factory set 48 hour
watering delay that will occur after a rain event shutdown if
you are using an SLW Weather Sensor for SMART Watering. To
eliminate the delay or to reduce or increase the factory default
hours, turn the dial to Advanced Menu and use an arrow button
to select SLW DLY. Press the NEXT button and 48 hours will
show in the display. Use the UP and DOWN buttons to eliminate
5.0 Advanced Menu
http://support.weathermatic.com
16