Panasonic NU-SC300BMPQ Manual page 8

Feature Diagram
fi gure 1
Drip tray
1. Take drip tray out from package and insert it to oven
legs according to figure 1.
2. Before using the oven, the drip tray must be fitted as
it collects excess water during cooking, otherwise the
cooking program cannot be performed.
3. The drip tray should be removed and cleaned on a
regular basis.
4. To remove the drip tray, hold with both hands and gently
ease forward, removed the cover (figure 2). Wash in
warm soapy water. Re-position the drip tray by clicking
back onto the legs according to the direction of figure 2.
5. DO NOT USE A DISHWASHER TO CLEAN THE DRIP
TRAY.
Note: When remove the drip tray, several drops may
fl ow from the water outlet of bottom cavity. You
can use soft cloth to wipe dry the water around
cavity after the oven cavity cooling down fi rst,
then remove drip tray.
Note: The above illustration is for reference only.
F0003CE21MP_eng.indd 8 F0003CE21MP_eng.indd 8
Control Panel
fi gure 2
Air Inlet
- Eng-8 -
(continued)
Water Tank's Installation / Removal:
Installation:
Hold the water tank horizontally, aligning the
bayonet and gently insert it to the bottom.
Removal:
After removing the drip tray, hold the bayonet
with both hands and pull out gently.
Air Outlet
Water Outlet
Identifi cation
Plate
2018/10/8 12:08:54 2018/10/8 12:08:54