Table of Contents
Advertisement
installation
8. Remove sand pan and pilot assembly.
Diagram 8
Cut here to remove
Diagram 5
11. Unscrew the top bar shown below.
9. Cut the plate located at the bottom of the firebox, as shown below.
Diagram 6
Cut here to remove bar
Diagram 9
10. Cut out the bottom of the Firebox (See Diagram 7)
Cut must be clean - with Max. 1/4" of material left.
12. Unscrew the top bar from location shown below.
Diagram 7
Diagram 10
40
|
Regency
E18E-11 Gas Fireplace Insert
®
Advertisement
Table of Contents
