ACME LED-245/2 User Manual

Led effect lighting

Advertisement

Please read this user manual carefully and follow the instructions to avoid danger or damage to
the unit due to mishandling.
A. Thank you for purchasing our LED effect lighting, We guarantee your
satisfaction in having acquired this lighting product.
B. Safety Introductions
Please keep this User Manual for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using the unit.
Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
It's important to ground the yellow/green conductor to earth in order to avoid electric shock.
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces. Be sure that no ventilation slots are blocked.
Disconnect mains power before replacement or servicing.
Replace only with the same type.
Make sure there are not flammable materials close to the unit while operating, as it is fire
hazard.
Use safety cable when fixes this unit.
In the event of serious operating problem, stop using the unit immediately. Never try to repair
the unit by yourself. Repair carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center and always use the same
type spare parts.
Do not touch any wire during operation as high voltage might be causing electric shock.
LED effect lighting
USER MANUAL
1A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LED-245/2 and is the answer not in the manual?

Questions and answers

Summary of Contents for ACME LED-245/2

  • Page 1 LED effect lighting USER MANUAL Please read this user manual carefully and follow the instructions to avoid danger or damage to the unit due to mishandling. A. Thank you for purchasing our LED effect lighting, We guarantee your satisfaction in having acquired this lighting product. B.
  • Page 2 C. Installation You can install the unit on the truss or ceiling, Use clamps to fix the unit to truss. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure. Also always use a safety cable that can hold 10 times of the weight of the unit when installing the fixture.

Table of Contents