Table of Contents
Advertisement
SuperServer E300-9D-4CN8TP/E300-9D-8CN8TP User's Manual
3.4 Front Control Panel
JF1 contains header pins for various buttons and indicators that are normally located on a
control panel at the front of the chassis. These connectors are designed specifically for use
with Supermicro chassis. See the figure below for the descriptions of the front control panel
buttons and LED indicators.
PWR
Reset
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be configured to function as a suspend
button (with a setting in the BIOS - see Chapter 4). To turn off the power when the system
is in suspend mode, press the button for 4 seconds or longer. Refer to the table below for
pin definitions.
1
Power Button
Reset Button
3.3V
UID
3.3V Stby
3.3V Stby
3.3V Stby
3.3V
15
Figure 3-2. JF1: Control Panel Pins
Power Button
Pin Definitions (JF1)
Pin#
Definition
1
Signal
2
Ground
34
2
Ground
Ground
PWR Fail LED
OH/Fan Fail LED
NIC2 Activity LED
NIC1 Activity LED
HDD LED
PWR LED
16
Advertisement
Table of Contents
