Craftmade Olivier OV70-LED Installation Manual
  1. Manuals
  2. Brands
  3. Craftmade Manuals
  4. Fan
  5. Olivier OV70-LED
  6. Installation manual

Craftmade Olivier OV70-LED Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Olivier
Installation Guide
For Model:
OV70-LED
WARNING:
DC Motor will not
operate until blades
are installed
APPROVED FOR USE IN
DAMP LOCATIONS
net weight of fan: 30.2 lb (13.7 kg)
READ THESE INSTRUCTIONS AND
SAVE THEM FOR FUTURE USE

Table of Contents:

Warranty. pg. 12
*
sold separately
PRINTED IN CHINA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Olivier OV70-LED and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Craftmade Olivier OV70-LED

Summary of Contents for Craftmade Olivier OV70-LED

  • Page 1: Table Of Contents

    READ THESE INSTRUCTIONS AND SAVE THEM FOR FUTURE USE Olivier Installation Guide For Model: OV70-LED Table of Contents: Safety Tips. pg. 1 Unpacking Your Fan. pg. 2 Parts Inventory. pg. 2 Installation Preparation. pg. 3 Hanging Bracket Installation. pg. 3 Fan Assembly.

  • Page 2: Safety Tips

    SAFETY TIPS. WARNING: To reduce the risk of electrical shock, turn off the electricity to the fan at the main fuse box or circuit panel before you begin the fan installation or before servicing the fan or installing accessories. READ ALL INSTRUCTIONS AND SAFETY INFORMATION CAREFULLY BEFORE INSTALLING YOUR FAN AND SAVE THESE INSTRUCTIONS.

  • Page 3: Unpacking Your Fan

    1. Unpacking Your Fan. Carefully open the packaging. Remove items from Styrofoam inserts. Remove motor housing and place on carpet or Styrofoam to avoid damage to finish. Do not discard fan carton or Styrofoam inserts should this fan need to be returned for repairs. Check against parts inventory that all parts have been included.

  • Page 4: Installation Preparation

    3. Installation Preparation. blade edge To prevent personal injury and damage, ensure inches 10 feet that the hanging location allows the blades a (3.05m) (76cm) clearance of 10 feet (3.05m) from the floor and 30in. (76cm) from any wall or obstruction. 12ft.

  • Page 5: Fan Assembly. Pgs

    5. Fan Assembly. set screw stop pin Remove hanging ball from downrod provided by loosening set screw on hanging ball. Lower hanging ball and remove stop pin and then slide hanging ball hanging ball off of the downrod. [Refer to diagram 1.] Loosen yoke set screws and nuts at top of motor housing.

  • Page 6: Wiring. Pgs

    wood 5. Fan Assembly. (cont.) ceiling joist safety cable loop With the hanging bracket secured to the outlet box and able to support the fan, you are now ready to hang your fan. Grab the fan firmly with two hands. Slide downrod through opening in hanging bracket and let hanging ball rest on the wood screw hanging bracket.

  • Page 7: Canopy Assembly

    6. Wiring. (cont.) Modifications not approved by the party responsible for compliance [PLEASE NOTE: Wall and/or handheld remote could void the user's authority to operate the equipment. control must be used for fan to operate. If you do *NOTE: This equipment has been tested and found to comply with the limits for a Class B not wish to use the wall control, please proceed to digital device, pursuant to Part 15 of the FCC Rules.

  • Page 8: Blade Assembly

    blade attachment 8. Blade Assembly. screws/washers WARNING: To reduce the risk of serious bodily injury, DO NOT use power tools to assemble the blades. If overtightened, blades may crack and break. blade Locate 15 blade attachment screws/washers in hardware pack. Locate 15 blade attachment screws and washers in hardware packs.
  • Page 9 9. Light Kit Assembly. (cont). Remove 1 screw from motor plate on underside of motor housing and partially motor loosen the other 2 screws. plate Connect WHITE wire from motor housing to WHITE wire from light kit fitter. Connect BLACK wire from motor housing to BLACK wire from light kit fitter.

  • Page 10: Handheld Remote Control Assembly

    10. Handheld Remote Control Assembly. remote IN ORDER TO USE THE HANDHELD REMOTE control CONTROL, CONTINUE WITH SECTION 10 for remote cover control assembly instructions. If you have already installed the wall control but do not wish to use the handheld remote control, please proceed to Section 11.

  • Page 11: Automated Learning Process./Activating Code

    11. Automated Learning Process./Activating Code. CAUTION: The wall and/or handheld remote control wall control can be programmed to multiple receivers or fans. If this is not desired, turn wall switch off to any other programmable receiver or fan. Restore electrical power and then, if using wall control, set slider switch on wall control to the ON position.

  • Page 12: Remote/Wall Control Operation

    12. Remote/Wall Control Operation. handheld wall control remote control IMPORTANT: Handheld remote control and wall III IV control must be SYNCHRONIZED with fan in order to properly function. Fan SPEED control buttons--1: Use to control the ceiling fan speed 1-6 Fan OFF button--2: Use to turn the fan off REVERSE function button--3:...

  • Page 13: Troubleshooting

    Service at 1-800-486-4892 to arrange for return of fan. 2. Verify that wall control (optional use) is wired properly. Return fan, shipping prepaid, to Craftmade. We will repair 3. Check to be sure fan is wired properly. or ship you a replacement fan, and we will pay the return 4.

This manual is also suitable for:

K10444

Table of Contents