Backlight; Operation Instructions; On/Off - Sinclair S-THERM GSH-TRB2+ Series User Manual

[Notes]
●The "Cooling" mode is unavailable to the heating only unit.
●The "Hot water" mode is unavailable to the heating only unit.
●The "Heating + Hot water" ("Hot water" takes the priority) is unavailable to the mini chiller.
●The "Hot water + Heating" ("Heating" takes the priority) is unavailable to the mini chiller.
●The "Cooling + Hot water" ("Hot water" takes the priority) is unavailable to the mini chiller.
●The "Hot water + Cooling" ("Cooling" takes the priority) is unavailable to the mini chiller.
●The "Sanitation" function is unavailable to the mini chiller.

1.3 Backlight

Among the general setting page, when "Back light" is set to "Energy save", the display panel will light off when
there is no operation in 5 minutes. However, it will light on again by touching any valid area.
When "Back light" is set to "Lighted", the display panel will be kept lighting on.
It is suggested to set it to "Energy save" so as to extend its service life.

2. Operation Instructions

2.1 ON/OFF

[Operation Instructions]
At the menu page, by touching ON/OFF, the unit will be turned on/off.
[Notes]
●It is defaulted to be OFF upon first power-on.
●ON/OFF operation will be memorized by setting "On/Off Memory" to be "On" at the "GENERAL." setting page.
That is, in case of power failure the unit will resume running upon power recovery. Once "On/off Memory" is set to
be "Off", in case of power failure the unit will keep "Off" upon power recovery.
Hot water + Cooling
Quiet
Sanitation
Emergency
Error Icon
4
Back
Menu page
Save
Error