[Notes]:
●The error log can accommodate up to 20 pieces of error. Name and occurrence time are available for each
error.
●When error log exceeds 20, the latest will supersede the earliest.
2.5.5 Version Viewing
[Operation Instructions]
At the "VIEW" page, by touching "Version", the control panel will go to the version view page, where it is able to
view both the program version and protocol version.
2.6 General Setting
[Operation Instructions]
1.At the menu page, by touching "GENERAL", the control panel will go to the setting page, as shown in the
figure below, where it is able to set "Temp.unit", "On/off memory", "Beeper", "Back light", "Time & Date" and
"Language".
No
Item
1
Temp. unit
2
On/Off memory
3
Beeper
4
Back light
5
Time&Data
General Setting Page
General Settings
Range
°C/°F
On/Off
Enter
Lighted/Energy save
Enter
Default
°C
On
On
"Lighted": the control panel will always
light on.
"Energy save": When there is no touching
Energy save
operation in 5 minutes, the control panel
will be lighted off automatically, but will
light on again once there is any touching
operation.
/
30
Remarks
/
/
/
/