Viewing - Sinclair S-THERM GSH-TRB2+ Series User Manual

Display
No Full Name
1 T-HP max T-HP max
[Notes]
●For parameters with different defaults at different conditions, once the current condition changes, the
corresponding default also will change.
●All parameters at this page will be memorized upon power failure.

2.5 Viewing

[Operation Instructions]
1.At the menu page, by touching "VIEW", the control panel will go to the sub-menu page as shown in the figure
below.
2.5.1 Status Viewing
[Operation Instructions]
1.At the "VIEW" page, by touching "Status", it is able to view status of the unit, as shown in the figure below.
No Full Name
1 Status of the compressor
2 Status of the fan
3 Status of the unit
4 Status of the water pump
5 Status of the water tank heater
6 Status of the 3-way valve 1
7 Status of the 3-way valve 2
Status of the compressor crankcase
8
heater
Range
Name
40~55℃
Displayed Name
Crankc. heater
Default
104~131°F 50℃ /122°F
VIEW Page
Status View Page
Viewable Status
Compressor
Fan
Unit status Cool/Heat/Hot water/Off
HP-pump
Tank heater
3-way valve 1
3-way valve 2
26
Remark
It is unavailable to mini chillers.
Status Remarks
On/Off
On/Off
"Cool" is unavailable to
the heating only unit.
On/Off
On/Off "NA" for mini chillers
NA
On/Off "NA" for mini chillers
On/Off
/
/
/
/
/