Using Job Accounting; Login/Logout - Kyocera ECOSYS PA2100CX Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Using Job Accounting

Using Job Accounting

This section explains procedures while setting job accounting.

Login/Logout

If job accounting is enabled, an account ID entry screen appears each time you use this machine.
Login
When the screen for entry of account codes on the machine appears, perform the following.
1
2
Logout
When the operations are complete, select the [Logout] key to return to the account ID entry screen.
Enter the account ID > [OK] key
NOTE
You can set a number from 1 to 8 digits.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
If the entered account ID does not match the registered ID, a warning beep will sound and
login will fail. Enter the correct account ID.
Proceed to complete the rest of the steps.
7-19