Kyocera ECOSYS PA2100CX Operation Manual page 137

Setup and Registration (System Menu) > System Menu
Item
ThinPrint over SSL
*1
Wi-Fi Direct
*1
Wi-Fi
Wired Network
WSD-PRINT
*1
Wi-Fi Direct
*1
Wi-Fi
Wired Network
Enhanced_WSD
*1
Wi-Fi Direct
*1
Wi-Fi
Wired Network
EnhancedWSD(SSL)
*1
Wi-Fi Direct
*1
Wi-Fi
Wired Network
*1 Displayed only when wireless network function is available on the machine.
*2 The setting will be changed after restarting the device or network.
*3 Set [SSL Server] to [On] in Network Settings.
SSL Server (page 6-13)
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
To use the Thin Print over SSL protocol, set [ThinPrint Over SSL] to [On].
Value: Off, On
NOTE
• This function is displayed when [ThinPrint] is set to [On].
• When selecting [On], it also requires a certificate for SSL. The default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [ThinPrint over SSL] is set to [On].
Set whether to use our proprietary web services.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [WSD-PRINT] is set to [On].
Set whether to use our proprietary web services.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Enhanced_WSD] is set to [On].
Set whether to use our proprietary web services over SSL.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [EnhancedWSD(SSL)] is set to [On].
6-16
Description
*2
*2
*2, *3
*2, *3