Kyocera ECOSYS PA2100CX Operation Manual page 132

Setup and Registration (System Menu) > System Menu
TCP/IP
Item
TCP/IP
DHCP
Auto-IP
IP Address
Subnet Mask
Gateway
IMPORTANT
• When setting the Auto-IP, enter "0.0.0.0" in [IP Address].
• After changing the setting, restart the network or turn the machine OFF and then ON.
Select whether to use TCP/IP (IPv4) Protocol.
Value: Off, On
Select whether to use the DHCP (IPv4) server.
Value: Off, On
Select whether to use Auto-IP.
Value: Off, On
Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this item is displayed only and cannot be entered.
Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this item is displayed only and cannot be entered.
Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this item is displayed only and cannot be entered.
6-11
Description