Table of Contents
Advertisement
Controlling the Print Quality
You can set the overall print quality from the front panel.
To Change the Print Quality Setting
Use the front-panel
print quality settings.
If you are using the AutoCAD or Windows drivers supplied with
the plotter, the print quality setting (or an equivalent) within the
driver will override the front-panel setting; the front-panel light
which is illuminated will change accordingly until this print job is
finished.
Changing the setting affects all plots, including the plotter's internal
sample plots, except those that are already in the plotter's queue.
Your print quality setting affects both the speed and the cost of
plotting—as shown in the table below.
Print Quality
Setting
Speed
Ink Used
Print quality also varies according to
your specification of the media type (see the table on page 13)
drying time—decreasing it may reduce print quality
in the case of the HP DesignJet 750C Plus only, whether
is active or not. The use of the
feature usually improves plot quality, as shown in the table on the next
page. (You may wish to experiment with the
the User's Guide for full details.)
key to switch between the three
Print Quality
Best
Normal
Fast
Print Quality
Fast
Sharp Lines
15
Normal
resolution enhancement
Sharp Lines
0027
Best
Sharp Lines
feature—see
Advertisement
Table of Contents
