Features Setup Page - PCchips M757MR User Manual

M757MR Mainboard User's Manual

Features Setup Page

This page sets some of the parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – FEATURES SETUP
©1998 American Megatrends, Inc. All Rights Reserved
OnBoard FDC Enabled
OnBoard Serial PortA 3F8h/COM1
OnBoard Serial PortB 2F8h/COM2
OnBoard IR Port
OnBoard Parallel Port 378h
Parallel Port Mode
Parallel Port IRQ 7
Parallel Port DMA
OnBoard PCI IDE Both
Ultra DMA Support Disabled
OnBoard Audio/Modem Enabled
USB Function Disabled
USB Function for DOS Disabled
OnBoard FDC Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial
Use this item to enable or disable the onboard
PortA COM1 serial port, and to assign a port address
OnBoard Serial
Use this item to enable or disable the onboard
COM2 serial port, and to assign a port address
PortB
OnBoard IR Port Use this item to define the protocol for an
infrared port if you have installed an optional IR
port. The choices are IrDA and ASKIR.
Onboard Parallel
Use this item to enable or disable the onboard
LPT1 parallel port, and to assign a port
Port
address. The Auto setting will detect and
available address.
Parallel Port Mode
Use this item to set the parallel port mode. You
can select SPP (Standard Parallel Port), ECP
(Extended Capabilities Port), EPP (Enhanced
Parallel Port), or ECP + EPP.
32
Disabled
EPP + ECP
3
ESC : Quit
F1 : Help
F5 : Old Values (Shift)F2
F6 : Load Optimal values
F7 : Load Best performance values
 : Select Item
PU/PD/+/- : Modify
: Color