Table of Contents
Advertisement
M757MR Mainboard User's Manual
Connect the power connector from the power supply to the ATX1
connector on the mainboard.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the CASFAN1 fan power connector
on the mainboard.
If your case has a dual color indicator lamp for the ACPI Green
suspend mode, connect the cable from the indicator to the J5 dual
color LED connector.
Connect the case switches and indicator LEDs to the PANEL1
switch and LED connector header. See the illustration below for a
guide to the PANEL1 connector pin assignments.
22 21
PANEL1
Power SW 21-22
Suspend SW 19-20
Reset SW 17-18
HDD LED 15-16
KeyLock 8-10
Speaker 1-3-5-7
Power LED 2-4-6
2 1
14
Advertisement
Table of Contents
