Table of Contents
Advertisement
SPDIF1
1
SPDIF Out
Optic Module
Optic Out
Extension Bracket
Optic In
SPDIF In
Aux In
1. On the mainboard, locate the SPDIF1 header for this bracket.
2. Plug the cable from the bracket into the SPDIF1 header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
Internal Digital Audio
If you have an optional internal digital audio cable, you can also
use it to connect the digital audio output connector of a CD-ROM
or DVD-ROM drive to the pins 5-6 of SPDIF1.
2: Mainboard Installation
17
Advertisement
Table of Contents
