Activation Via Web Browser; Activation Via Sadp Software - HIKVISION DS-2TD4136T-9 Quick Start Manual

4.2.1 Activation via Web Browser

Steps:
1. Power on the system, and connect the system to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to
enter the activation interface.
The default IP address of the system is 192.168.1.64.
3. Create a password and input the password into the password field.
STRONG PASSWORD RECOMMENDED– We highly recommend you
create a strong password of your own choosing (using a minimum of 8
characters, including upper case letters, lower case letters, numbers,
and special characters) in order to increase the security of your
product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly
or weekly can better protect your product.
4. Confirm the password.
5. Click OK to activate the system and enter the live view interface.

4.2.2 Activation via SADP Software

SADP software is used for detecting the online device, activating the device, and
resetting the password.
Get the SADP software from the supplied disk or the official website, and install
the SADP according to the prompts. Follow the steps to activate the system.
Steps:
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select an inactive device.
Thermal Network Speed dome·Quick Start Guide
Figure 4-2 Activation Interface(Web)
13