Setting The System Over The Lan; Wiring; Activating The System - HIKVISION DS-2TD4136T-9 Quick Start Manual

4 Setting the System over the LAN

 You shall acknowledge that the use of the product with Internet access
might be under network security risks. For avoidance of any network attacks
and information leakage, please strengthen your own protection. If the
product does not work properly, please contact with your dealer or the
nearest service center.
 To ensure the network security of the speed dome, we recommend you to
have the system assessed and maintained termly. You can contact us if you
need such service.

4.1 Wiring

To view and configure the system via LAN (Local Area Network), you need to
connect the network system in the same subnet with your PC. Then, install the
SADP or client software to search and change the IP of network system.
The following figure shows the cable connection of network system.
Network
Speed Dome

4.2 Activating the System

Purpose:
You are required to activate the system first by setting a strong password for it
before you can use the system.
Activation via Web Browser, Activation via SADP, and Activation via client software
are supported. In the following sections, activation via web browser and SADP will
be taken as examples. You may refer to the user manual of the system for the
details of activation via client software.
Thermal Network Speed dome·Quick Start Guide
Switch
Figure 4-1 Wiring over LAN
Internet
NVR
12
PC