HIKVISION DS-2TD4136T-9 Quick Start Manual page 15

2). Drill four Φ12 expansion screw holed on the wall and insert the delivered
screws into the holes.
3). Secure the wall mounting bracket with 4 hex nuts and washers.
2. Stick thread tape to the thread of the head cover and rotate the head cover.
Secure the head cover to the bracket with delivered set screws.
3. Install the dome body to the head cover.
1). Buckle the handle to the safety rope.
Thermal Network Speed dome·Quick Start Guide
Figure 3-4 Drill Screw Holes
Figure 3-5 Secure the Bracket
Head Cover
Figure 3-6 Secure the Head Cover
+
Figure 3-7 Buckle the Handle
③
①
②
9