HIKVISION DS-2TD4136T-9 Quick Start Manual page 16

2). Hook the two ends of the safety rope to the back box of the speed dome
and the bracket respectively.
3). Hitch the speed dome onto the head cover with the hook on the back box.
4). Route the cables through the head cover and bracket.
4. Connect the corresponding cables.
5. Align the back box of the speed dome with the head cover. Use an L-wrench to
tighten the lock screws to secure the speed dome and the bracket.
Thermal Network Speed dome·Quick Start Guide
Figure 3-8 Hang the Speed Dome
Figure 3-9 Route the Cables
10