Amcrest IP2M-856EB User Manual page 86

5.4.2.4 IP Filter
This screen allows for the filtering of IP addresses, either blocking them, or granting them access to the camera. This
feature helps make the camera more secure by limiting remote access only to approved users. Below is a screenshot
of the IP Filter screen:
Below is an explanation of fields on the IP Filter settings screen:
•
Trusted Sites: This checkbox allows the user to enable the IP Filter feature for trusted sites.
•
Add IP/MAC: This button opens a popup that allows the user to add IP or MAC addresses to the trusted site list. Note:
When accessing the camera externally, please add the MAC address of the router on the PC end.
•
Remove All: This button allows the user to remove all sites from the trusted IP/MAC list.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the
settings, click the Save button.
5.4.2.5. SMTP (Email)
This screen allows for the configuring of email settings to permit the camera to send emails when an alarm is
triggered. Below is a screenshot of the email settings screen:
86