Amcrest IP2M-856EB User Manual page 10

5. Scan the QR code
the camera or manually enter the camera's serial
number into the Enter camera S/N (serial number)
field. Press Next to continue.
7. Set a new password for your camera. The password
must be between 8 to 32 characters long and contain
only letters and numbers. When you have finished
setting the password for your camera, enter the
password again in the Confirm Camera Password
section. Tap Next to continue.
For more information about the Amcrest Cloud app and its features, visit
on the back/side/bottom of
6. If you are adding a new camera that does not have a
set password the app will automatically detect that a
new camera is being added. Tap OK to proceed.
8. Confirm and adjust any needed settings for your
camera. When all settings have been confirmed, tap
Finish.
amcrest.com/support
10