Amcrest IP2M-856EB User Manual page 100

Below is an explanation of the fields on the SD Card settings tab:
•
Device Name: This column designates the name of the SD card that is currently in the camera.
•
Status: This column designates the status of the SD card.
•
Attribute: This column designates the read/write attributes for the SD card. By default, this is Read &
Write.
•
Used Capacity/Total Capacity: This column shows the available memory on the SC card.
Read Only: This button allows the user to designate an SD card as read only.
•
Hot Swap: This button allows the user to physically remove the SD card and replace it with another safely.
•
Refresh: This button refreshes the SD card table.
•
Format: This button formats the SD card.
5.4.4.2.3 FTP
This tab is where the user can change FTP settings. Below is a screenshot of the FTP tab:
Below is an explanation of the fields on the FTP settings tab:
•
Enable: This checkbox allows the user to enable FTP uploading for the camera's recorded media.
•
Server Address: This field allows the user to designate a DDNS address for the FTP server.
•
Port: This field allows the user to designate the port number for the FTP server.
•
User Name: This field allows the user to input the username used to login to the FTP server.
•
Password: This field allows the user to input the password used to login to the FTP server.
•
Remote Directory: This field allows the user to specify a remote directory on the FTP to send the recorded media to.
•
Emergency (Store on SD Card): This checkbox allows the camera to store recorded media on the SD card in case the
FTP server is unavailable.
100