Table of Contents
Advertisement
ASSEMBLY
Assembly requires two persons.
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the
top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-
mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.
Assembly requires the included allen wrenches
and wire cutters
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST on pages 26 and 27. The number after the parentheses shows
the quantity needed for assembly.
one of the parts to be assembled.
Extension Leg Bolt (96)–4
1/4" Washer
(39)–4
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully raise the
Uprights (97) to the position shown. Insert one of the
Extension Legs (92) into the right Upright. (Note: It may
be helpful to tip the Uprights forward as you insert the
Extension Leg.) Make sure that the Warning Decal (91)
is in the indicated location.
Insert the other Extension Leg (not shown) in the same
way.
All manuals and user guides at all-guides.com
Set the treadmill in a cleared area and remove all packing materials. Do not
.
Note: If a part is not in the parts bag, check to see if it is preattached to
1" Tek Screw (80)–2
Internal Star
Washer (77)–4
and your own phillips screwdriver
Upright Bolt (76)–4
1
91
5
Latch Screw (79)–2
97
92
Advertisement
Table of Contents
