Table of Contents
Advertisement
www.proform.com
Model No. PFTL79611.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-888-533-1333
Mon.––Fri. 6 a.m.––6 p.m. MT
Sat. 8 a.m.––4 p.m. MT
ON THE WEB:
www.proformservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER’'S MANUAL
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pro-Form 795 Treadmill
Summary of Contents for Pro-Form 795 Treadmill
- Page 1 Model No. PFTL79611.0 USER’’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.
-
Page 2: Table Of Contents
Note: The decals may not be shown at actual size. PROFORM is a registered trademark of ICON IP, Inc. iPod, iPod nano, iPod touch, and iTunes are registered trademarks of Apple Inc., registered in the U.S. and other countries. iPod is not included. -
Page 3: Important Precautions
Do not put the treadmill in a PROFORM dealer, call the telephone number garage or covered patio, or near water. on the front cover of this manual, or see your local electronics store. - Page 4 19. The heart rate monitor is not a medical 23. Never insert any object into any opening on device. Various factors, including the user’’s the treadmill. movement, may affect the accuracy of heart rate readings. The heart rate monitor is 24.
-
Page 5: Before You Begin
Thank you for selecting the revolutionary PROFORM ® reading this manual, please see the front cover of this POWER 795 treadmill. The POWER 795 treadmill manual. To help us assist you, please note the product offers an impressive selection of features designed model number and serial number before contacting us. -
Page 6: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. -
Page 7: Assembly
ASSEMBLY •• To hire an authorized service technician to •• To identify small parts, see page 6. assemble the treadmill, call 1-800-445-2480. •• Assembly requires the following tools: •• Assembly requires two persons. the included hex keys •• Place all parts in a cleared area and remove the packing materials. - Page 8 3. Identify the Left Upright (89), which is either marked ““Left”” or ““L.”” Have a second person hold the Left Upright near the Base (94). See the inset drawing. Tie the wire tie in the Left Upright (89) securely around the end of the Wire Upright Wire (81).
- Page 9 5. Identify the Left Base Cover (82) and the Right Base Cover (83). Slide the Left Base Cover onto the Left Upright (89). Slide the Right Base Cover onto the Right Upright (90). Do not press the Base Covers into place yet. Identify the Left Upright Cover (79) and the Right Upright Cover (80).
- Page 10 7. Attach the Left Handrail (88) to the Left Upright (89) with two 5/16" x 1" Screws (5), two 5/16" Star Washers (11), and a 5/16" x 1 1/4" Bolt (4). Do not fully tighten the Screws and Bolt yet. Attach the Right Handrail (87) in the same way.
- Page 11 10. With the help of a second person, hold the con- sole assembly near the Left Handrail (88). Connect the Upright Wire (81) to the console Console wire. See the inset drawing. The connectors Assembly should slide together easily and snap into place.
- Page 12 12. Firmly tighten the four 3/8" x 2 3/4" Screws (7) and the four 3/8" x 1 1/4" Screws (8) (only one side is shown). Press the Left Base Cover (82) and the Right Base Cover (83) onto the Base (94) until they snap into place.
- Page 13 15. Attach the Left Tray (107) and the Right Tray (108) to the console assembly with four #8 x 1/2" Screws (1). Console Assembly 16. IMPORTANT: See page 15 and plug in the power cord. Next, see page 17 and turn on IMPORTANT: the power.
- Page 14 17. IMPORTANT: Before you begin this step, make sure that you have read and followed all instructions in step 16. Next, raise the Frame (56) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (53) so that the large barrel and the latch knob are oriented as shown.
-
Page 15: Operation And Adjustment
OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same damaged by sudden voltage changes in your home’’s... - Page 16 20. To use an iFit Live workout, see page workout automatically controls the speed and incline of 21. To use a PROFORM SYNC, see page 22. To use the treadmill as it guides you through an effective exer- the information mode, see page 23.
-
Page 17: To Turn On Power
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left. - Page 18 The Time display—— When a PROFORM This display will show SYNC is connected the elapsed time. Note: to the console, the...
- Page 19 6. Measure your heart rate if desired. 8. When you are nished exercising, remove the key from the console. Before using the hand- Step onto the foot rails, press the Stop button, and grip heart adjust the incline of the treadmill to the lowest rate monitor, setting.
- Page 20 HOW TO USE AN ONBOARD WORKOUT The workout will continue in this way until the last segment of the pro le ashes in the display and the 1. Insert the key into the console. last segment ends. The walking belt will then slow to a stop.
- Page 21 HOW TO USE AN IFIT LIVE WORKOUT www.iFit.com. Note: If there are no workouts of the selected type in your schedule, the next work- Note: To use an iFit Live workout, you must have an out in your schedule will be downloaded. optional iFit Live module.
- Page 22 5th generation) or an iPod touch (2nd, 3rd, or 4th ® The optional PROFORM SYNC enables you to generation). You must also have access to a computer record your treadmill workout results on your iPod with an internet connection.
- Page 23 THE INFORMATION MODE ON will appear in the center display. To turn on or turn off the demo mode, press the Enter button or The console features an information mode that keeps the Speed decrease button. track of treadmill information and allows you to person- alize console settings.
- Page 24 CD player, or other personal other personal audio player to the console through the audio player. Adjust the vol- audio jack or through the optional PROFORM SYNC. ume on your personal audio The SYNC will charge your iPod while you use it.
-
Page 25: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to the lowest position before you fold the treadmill. left. -
Page 26: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by follow- c. Remove the key from the console, and then ing the simple steps below. Find the symptom that reinsert it. applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. d. - Page 27 Locate the Reed Switch (52) and the Magnet (50) b. If the walking belt is overtightened, treadmill per- on the left side of the Pulley (49). Turn the Pulley formance may decrease and the walking belt may until the Magnet is aligned with the Reed Switch. become damaged.
- Page 28 SYMPTOM: The walking belt is off-center or slips b. If the walking belt slips when walked on, rst when walked on remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller a. If the walking belt is off-center, rst remove the screws clockwise, 1/4 of a turn.
-
Page 29: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat——To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 30: Part List
PART LIST Model No. PFTL79611.0 R0113A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Screw Reed Switch Clip #8 x 3/4" Screw Reed Switch 3/8" x 2" Bolt Storage Latch 5/16" x 1 1/4" Bolt Drive Motor 5/16"... - Page 31 Key No. Qty. Description Key No. Qty. Description Module Housing Right Tray Console Back Console Base Console Base Ground Wire Console Frame Hood Clip Ground Wire #10 x 3/4" Flat Head Screw Console Clamp 5/16" Flat Washer Left Tray –– User’’s Manual Note: Speci...
-
Page 32: Exploded Drawing
EXPLODED DRAWING A Model No. PFTL79611.0 R0113A... - Page 33 EXPLODED DRAWING B Model No. PFTL79611.0 R0113A...
- Page 34 EXPLODED DRAWING C Model No. PFTL79611.0 R0113A...
- Page 35 EXPLODED DRAWING D Model No. PFTL79611.0 R0113A...
-
Page 36: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: •• the model number and serial number of the product (see the front cover of this manual) ••...
Need help?
Do you have a question about the 795 Treadmill and is the answer not in the manual?
Questions and answers
The mat has become displaced from the center. According to the troubleshooting guide, I need a hex key to fix this. I do not have the original hex key that came with the unit. What size hex key do I need to buy to address this issue?