How To Use - JTS RU-8011DB Instruction Manual

6-2 How to use //

Parameter setting
Push and hold the "SET" button to enter the
setting mode. Push the ▲/▼ button to choose
to set RX (receiver) or TX (transmitter).
When RX receiver is selected:
◎ FREQ: frequency setting
In 1MHz
In 0.025MHz
◎ Group / channel
G: group Select default group 1~6
CH: channel Select default channel, 1~22 max
◎ Channel scan
SC oFF This means the function is deactivated.
SC on This means the function is activated.
(scan to make sure this channel is oc-
cupied or not) The program will avoid it
automatically to prevent interference.
Note: this function works only in the preset mode.
27
Select frequency with ▲/▼
Select frequency with ▲/▼
Select the number of frequency first in MHz and
then in 0.025MHz.
Select the group when "G" is flashing; select the
channel when "CH" is flashing.
This function is deactivated.