Description Of Parts; Uhf Pll Single-Channel Diversity Receiver - JTS RU-8011DB Instruction Manual

4. Description of parts

4-1 UHF PLL single-channel diversity receiver //

Front panel
8 7
6 5
Power: means "ON" and
1
SET: this is for function settings. Push and hold for 2 seconds to enter the
2
setting mode. Push "SET" repeatedly to search for the function you wish to set.
▲/▼In the setting mode, push▲/▼to change the function parameter
3
In the non-setting mode: push▲/▼to adjust volume
LCD display
4
Lock :push and hold "Lock" for 2 seconds to lock the buttons in order to
5
prevent pushing any button by accident.
Remoset u : this allows user to synchronize the transmitter after modifying a
6
parameter. Push "
Remoset indicator : this shows the current pairing status. It flashes rapidly
7
when data is being transmitted and the flashing stops when the synchroniza-
tion is completed. However, the flashing slows down if synchronization fails
after a period of time of pairing attempt.
Ultrasonic transmission unit: it transmits digital pairing data at ultrasonic
8
frequency. When setting, direct the ultrasonic receiving element of the micro-
phone to the ultrasonic transmitting unit of the receivers. The effective range
is 30º on both sides with the optimized distance at 30cm.
Receiving antenna: fixed antenna of 1/4 wave length
9
6.3mm phone jack: unbalanced audio output jack
10
3P XLR male: balanced audio output jack
11
DC power socket: for 12~15V DC / 300mA power supply
12
4 3
2 1
means "OFF"
" to synchronize the settings to the transmitter.
Rear panel
Antenna A
12V out
100mA
9 10
Antenna B
12V out
100mA
11 9 12
8