6. Instructions for use
6-1 How to use //
Parameter setting
Push and hold the "SET" button
to enter the setting mode.
◎ Group / channel setting
G: group
CH : channel
◎ Channel scan
SC
This means the function is deactivated.
oF
SC
This means the function is activated.
(scan to make sure this channel is oc-
on
cupied or not
automatically to prevent interference.
◎ Audio output attenuation (XLR)
At oF
At on
◎ SQ receiving sensitivity
-5~+10dB;
select SQ
▲/▼
with
Select default group 1~6
Select default channel, 1~22
max
)
The program will avoid it
No attenuation at audio output
20dB attenuation at audio ouput
-5 is the maximum sensitivity.
+10 is the minimum sensitivity.
The default setting is 0.
Select the group when "G" is flashing; select the
channel when "CH" is flashing.
This function is deactivated.
This function is deactivated.
default setting
The
is 0.
24