Table of Contents
Advertisement
Removal steps of the LCD cable, the camera/microphone-module, and the LED cable
When installing:
Attention: As you route the cables, ensure that they are not subject to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
2060 Wireless-LAN/WAN antenna assembly, WiGig antenna assembly,
and LCD rear-cover assembly
Note: Before you start the servicing, disable the built-in battery. See "Disabling the built-in battery" on page
68.
For access, remove these FRUs in order:
• "1010 Removable battery" on page 68
• "1030 Base cover assembly" on page 69
• "1200 LCD unit" on page 93
• "2010 LCD-bezel sheet" on page 97
• "2020 LCD panel" on page 97
• "2030 LCD hinge assembly" on page 98
.
101
Chapter 9
Removing or replacing a FRU
Advertisement
Table of Contents
