Removal steps of the camera and LED cable, and LCD cable
When installing:
Attention: As you route the cables, ensure that they are not subject to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
2060 Wireless-LAN/WAN antenna assembly and LCD rear-cover
assembly
Note: Before you start the servicing, disable the built-in battery. See "Disabling the built-in battery" on page
64.
For access, remove these FRUs in order:
• "1010 Removable battery" on page 64
• "1030 Base cover assembly" on page 65
• "1210 LCD unit" on page 90
• "2010 LCD bezel sheet" on page 93
• "2020 LCD panel" on page 94
• "2030 LCD hinge assembly" on page 96
100
T480 Hardware Maintenance Manual