Table of Contents
Advertisement
Removal steps of the camera/microphone module
When installing:
Ensure that the connector is attached firmly.
2050 LCD cable, camera/microphone-module, and LED cable
Note: Before you start the servicing, disable the built-in battery. See "Disabling the built-in battery" on page
68.
For access, remove these FRUs in order:
• "1010 Removable battery" on page 68
• "1030 Base cover assembly" on page 69
• "1200 LCD unit" on page 93
• "2010 LCD-bezel sheet" on page 97
• "2020 LCD panel" on page 97
100
T470 Hardware Maintenance Manual
Advertisement
Table of Contents
