Removal steps of the LCD cable, the camera/microphone-module, and the LED cable
When installing:
Attention: As you route the cables, ensure that they are not subject to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
2060 Wireless-LAN/WAN antenna assembly, WiGig antenna assembly,
and LCD rear-cover assembly
Note: Before you start the servicing, disable the built-in battery. See "Disabling the built-in battery"
on page 66.
For access, remove these FRUs in order:
•
"1010 Removable battery" on page 66
•
"1030 Base cover assembly" on page 68
•
"1200 LCD unit" on page 93
•
"2010 LCD-bezel sheet" on page 97
•
"2020 LCD panel" on page 98
•
"2030 LCD hinge assembly" on page 99
.
Chapter 9
Removing or replacing a FRU
101