When installing:
Attention: As you route the cables, ensure that they are not subject to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
2060 Wireless-LAN/WAN antenna assembly or wireless-LAN antenna,
and LCD rear-cover assembly (for non-touch models)
Note: Before you start the servicing, disable the internal battery pack. See "Disabling the internal battery
pack" on page 60.
For access, remove these FRUs in order:
•
"1010 SIM card and SIM-card tray" on page 60
•
"1020 External battery pack" on page 60
•
"1040 Base cover assembly" on page 68
•
"1160 LCD unit" on page 85
• "2010 LCD-bezel sheet and LCD bezel assembly (for non-touch models)" on page 101
•
"2020 LCD panel (for non-touch models)" on page 103
• "2030 LCD hinges and LCD cable (for non-touch models)" on page 104
•
"2050 Camera/microphone-module cable, camera-module cable, or microphone-module cable (for
non-touch models)" on page 106
Removal steps of the wireless-LAN/WAN antenna assembly or wireless-LAN antenna, and LCD
rear-cover assembly
2
2
2
1
1
1
1
1
1
.
Chapter 9
Removing or replacing a FRU
107